A fixed asset audit checks that every asset on the fixed asset register exists, sits where the register says, belongs to the company, is in use and carries the right value. Most teams run it in five stages: plan the scope, physically verify assets, reconcile the register with the general ledger, investigate and correct differences, then report. Tagging assets with QR codes and verifying them on a mobile app removes manual spreadsheet counts.

What is a fixed asset audit?

A fixed asset audit is a review of your long term tangible assets (land, buildings, machinery, vehicles, furniture and IT hardware) against the records that describe them. It tests the fixed asset register and the general ledger from two directions: from the books to the floor (does every recorded asset exist?) and from the floor to the books (is every asset you find recorded?).

It can be run by internal audit or finance as an ongoing control, or by the statutory auditor as part of the year end audit. In India, the auditor’s report under CARO 2020 must state whether the company keeps proper records of property, plant and equipment, whether management verified them physically at reasonable intervals, and whether material discrepancies were found and dealt with in the books. Whatever your jurisdiction, the evidence the auditor wants is the same: a reliable register and proof that someone checked it against reality.

Objectives of a fixed asset audit

Each audit procedure exists to prove one of these assertions.

ObjectiveQuestion it answersTypical evidence
ExistenceDoes every asset on the register physically exist?Physical verification sheets, scan logs, photos
CompletenessIs every asset we own on the register?Floor to book sample, purchase invoices, capital work in progress
Ownership (rights)Do we own or control it?Invoices, title deeds, lease agreements
ValuationAre cost, depreciation and net book value correct?Depreciation schedule, useful life policy, impairment review
Condition and useIs it working and in use, or idle, damaged or obsolete?Condition notes from verification, maintenance records
Location and custodyIs it where the register says, with the named custodian?Location field, custodian acknowledgements
Presentation and complianceDo the accounts disclose it correctly under the applicable standards?Fixed asset schedule, reconciliations, policy notes

Fixed asset audit procedures: step by step

  1. Plan the scope and timing. List the sites, asset classes and value thresholds in scope. Decide whether this is a full count or a cycle count of selected classes, set the cut off date and freeze asset movements during the count where you can.
  2. Prepare the register and ledger. Export the fixed asset register as at the cut off date and agree its total cost, accumulated depreciation and net book value to the general ledger before anyone leaves the office. If these do not match, fix that first.
  3. Assign teams and tools. Pair someone who knows the site with someone independent of the assets being counted. Give each team a location list and a scanner or mobile app rather than printed spreadsheets.
  4. Physically verify assets. Scan or record each asset’s tag, location, custodian and condition. Work both ways: book to floor for existence, and floor to book for completeness. Photograph damaged or unidentified items.
  5. Reconcile results with the register. Classify every exception: missing, found but unrecorded, wrong location, wrong custodian, damaged or idle.
  6. Test valuation. Recalculate depreciation on a sample, check useful lives and residual values against policy, and look for impairment on idle or damaged assets. Our asset depreciation calculator is a quick way to recheck straight line, declining balance or sum of the years’ digits figures.
  7. Test additions and disposals. Vouch new assets to invoices and capitalisation approvals. For disposals, check approval, proceeds, the gain or loss posted and that the asset left the register.
  8. Investigate and correct. Agree each exception with its owner. Post write offs, transfers and corrections with approval, and keep the evidence.
  9. Report and fix the controls. Summarise findings, adjustments and root causes, and agree actions with owners and dates. Feed the results into the next audit plan.

Fixed asset audit checklist

Use this as the working checklist for each audit. The downloadable version adds sign off columns and an exception log.

AreaCheckDone
PolicyCapitalisation threshold, useful lives and depreciation methods are documented and approved
RegisterRegister total agrees to the general ledger at the cut off date
RegisterEvery asset has a unique ID, category, location and custodian
TaggingEvery asset in scope carries a readable barcode or QR tag
VerificationBook to floor sample covers all high value assets
VerificationFloor to book sample covers each site
VerificationCondition recorded and idle or damaged assets flagged
AdditionsNew assets vouched to invoice, PO and capitalisation approval
DisposalsDisposals approved, removed from the register and gain or loss posted
ValuationDepreciation recalculated on a sample; useful lives and residual values reviewed
ValuationImpairment indicators reviewed
OwnershipTitle deeds and lease agreements sighted for land, buildings and leased assets
ExceptionsAll discrepancies investigated, approved and posted
ReportingFindings, adjustments and control actions signed off by asset owners and finance

Internal vs external fixed asset audits

Both look at the same assets, but for different reasons.

Internal fixed asset auditExternal (statutory) audit
Who runs itInternal audit, finance or asset management teamIndependent statutory auditor
PurposeKeep records accurate and controls working all yearGive an opinion on the financial statements
FrequencyOngoing cycle counts plus a planned full verificationAnnual, around year end
FocusProcess gaps, custody, utilisation, loss preventionMaterial misstatement, valuation and disclosure
OutputException list, corrections and control improvementsAudit opinion and, in India, the CARO report on PPE

Fixed assets internal audit: what internal auditors look at

Internal auditors spend less time on the year end number and more on whether the process produces the right number every month. Typical areas:

  • Segregation of duties. The person who approves a purchase should not be the one who records and verifies the asset.
  • Movement controls. Transfers between sites and loans to staff should go through a recorded approval, such as a gate pass, so the register follows the asset.
  • Custodian accountability. Each employee who holds an asset should acknowledge it, and confirm it again on a periodic attestation.
  • Change history. Every edit to cost, location or status should carry a user and timestamp.
  • Idle and obsolete assets. Equipment nobody uses still costs insurance and maintenance, and may need an impairment review.

Building an IT asset management audit program

An asset management audit program is the plan that says what gets audited, how often, by whom and against which controls. For IT assets it has to cover more than hardware.

  • Scope. Hardware (end user devices, servers, network equipment), software licences and subscriptions, and cloud resources. Include assets at remote sites and with remote employees.
  • Cadence. A risk based cycle: high value and portable assets such as laptops each quarter, infrastructure twice a year, the full estate at least once a year. Write the cycle down so you can show it is reasonable.
  • Software licence reconciliation. Compare installed software and usage against purchased entitlements to find under licensing (a compliance risk) and unused licences (a cost). See software license management.
  • Discovery versus register. Compare what network discovery finds with what the register lists. Devices on the network but not on the register are your completeness gap. See IT asset discovery.
  • Roles. Name the program owner, the counting teams, the reviewers and who approves write offs.
  • Metrics. Track register accuracy (assets verified without exception divided by assets checked), the share of assets verified this cycle, unresolved exceptions and the value written off.
  • Evidence. Keep scan logs, attestations, reconciliations and approvals together, because they are what the external auditor will ask for.

How often should you audit fixed assets?

There is no single legal interval. CARO 2020 asks Indian auditors whether physical verification happened at reasonable intervals, but the term is not defined in statute. A practical reading is a documented cycle that covers the whole estate within the period, checks high value or high risk assets more often, and covers a small estate fully every year. Most companies pair a full annual verification with quarterly or monthly cycle counts of portable and high value assets.

Common problems in fixed asset audits and how to fix them

These are the exceptions that show up in almost every count, and what stops them coming back.

ProblemWhat it looks likeFix
Ghost assetsOn the register but cannot be foundInvestigate, write off with approval, tighten disposal and movement controls
Unrecorded assetsFound on site but not on the registerVouch to invoice, capitalise or expense, and fix the purchase to register handover
Wrong location or custodianAsset exists but moved without a recordRecord transfers through an approval workflow; ask custodians to confirm periodically
Missing or unreadable tagsStaff match serial numbers by handRetag with durable barcode or QR labels during the count
Depreciation errorsWrong useful life, method or start dateRecalculate, correct and lock depreciation rules by asset class
Disposals not recordedScrapped or sold assets still depreciatingRequire a disposal approval and certificate before the asset leaves the site
Version chaosSeveral spreadsheet copies, none trustedMove to one system of record with a change history

Best practices for fixed asset audits

  • Write the policy first. Capitalisation threshold, useful lives, depreciation methods and verification cycle should be approved before the count.
  • Tag everything once, properly. Durable barcode or QR labels turn every future check into a scan.
  • Count against the system, not a printout. Mobile verification records the location, custodian and time of each check as it happens.
  • Keep the register live. Purchases, transfers and disposals update it through workflow, so the audit finds fewer surprises.
  • Make custodians accountable. Allocation acknowledgements and periodic attestations push verification out to the people who hold the assets.
  • Reconcile finance and IT. One record per asset, with financial and technical details in the same place, removes a whole class of exceptions.
  • Close the loop. Every finding gets an owner and a date, and the next audit checks it.

How software makes fixed asset audits easier

Spreadsheets make audits slow because the register is out of date before the count starts and every exception has to be traced by hand. Infraon Assets gives mid market and enterprise IT and finance teams one register for IT and non IT assets, built for audits:

  • Barcode and QR code generation and printing, and QR code verification on the Android and iOS app, with location tracking (Essential plan). See QR code asset tracking.
  • Asset acceptance and rejection by the employee who receives the asset, so every allocation is acknowledged (Standard).
  • Automated discovery, agent based and agentless, to find devices that are missing from the register (Professional).
  • A fixed asset register with financial details and depreciation rules that calculate net asset value, plus asset history and change logs, audit and security event logs, periodic asset owner attestation, gate passes for asset movement and disposal certificates. See fixed asset management and asset verification and audit.

See how QR code verification on mobile and a live fixed asset register take the spreadsheet out of your next audit, and read how Gulshan Homz improved compliance by up to 75% with Infraon Assets.

Gulshan Homz, a real estate developer in India, uses Infraon Assets with customised asset IDs, barcode and QR scanning and bulk onboarding of IT and fixed assets, and reported up to 75% better organisational compliance. Read the Gulshan Homz case study.

Infraon Assets runs as SaaS, or as the Enterprise edition on premise or hybrid in the country you need, with Arabic language support. Plans start at $155 per month for 1,000 assets and 10 users, with 20% off on yearly billing; see Infraon Assets pricing.

Plan your next audit on Infraon Assets. Plans start at $155 per month for 1,000 assets and 10 users. Start a 14 day free trial (choose Infraon Assets on the signup form) or book a demo.

Frequently Asked Questions

What is a fixed asset audit?

It is a check that every asset on the fixed asset register exists, is owned by the company, is where the register says and is valued correctly, and that every asset you hold is recorded.

What are the main audit procedures for fixed assets?

Agree the register to the general ledger, physically verify assets book to floor and floor to book, reconcile and investigate differences, recalculate depreciation on a sample, vouch additions and disposals, check ownership documents, then report and correct.

How often should fixed assets be physically verified?

No law sets a fixed interval. Use a documented cycle that covers the whole estate within the period, with high value and portable assets checked more often. Many companies do a full annual count plus quarterly cycle counts.

Who performs a fixed asset audit?

Management, finance or internal audit carry out physical verification and ongoing checks. The statutory auditor reviews that work and tests the figures as part of the annual audit.

What documents are needed for a fixed asset audit?

The fixed asset register, general ledger and fixed asset schedule, purchase invoices and capitalisation approvals, depreciation policy and calculations, disposal approvals, title deeds and lease agreements, and the results of the last physical verification.

What is the difference between an internal and an external fixed asset audit?

An internal audit keeps records and controls accurate through the year and focuses on process and custody. An external audit is independent, runs annually and gives an opinion on whether the financial statements are fairly stated.

What is an asset management audit program?

It is the documented plan for auditing assets: scope, cycle, roles, controls tested, metrics and evidence kept. For IT assets it also covers software licence reconciliation and comparing network discovery with the register.

Do you like Sudhakar Aruchamy's articles? Follow on social!
Start Free Trial